USER MANUAL
PD-SATA USB/LAN
The IP address as
our
ost
nt.
seen in the screen
captures is for
reference only. Y
IP address will m
likely be differe
To reset the device,
to its factory default
settings, press and
hold the rese
utton
nd reboot the LAN
isk.
t
button, turn on the
power and wait for
the LED to stop
blinking (~30 sec).
Release the b
a
d
If you connect the
LAN disk to your
computer directly,
make sure to obtain
the IP address
DNS settings
automatically,
otherwise you may
not be able t
and
o find
e device.
er the IP address from the
e.
th
5. Open your web browser and ent
previous step to access the web configuration interfac
6. Press the Enter key and you will be asked for the username
and password to login.
Default Login
Username: admin
Password: admin
Note: We strongly suggest you to change the password as
soon as you are logged in, to prevent unauthorized access.
4.1.4 Peer to Peer
If you connect the network drive directly to your computer via
thernet cable, you can access it using its default IP
h cable that has been
cluded with your product. There is no need for a crossover
the DHCP server of the network drive will turn
E
169.254.0.1. Open the web browser and enter 169.254.0.1 to
access the configuration page.
Note: You can use the standard patc
in
cable because
on automatically.
Page 11 / Chapter 4 - LAN Disk Setup
