USER MANUAL
PD-SATA USB/LAN
For RMA and other
se
or
e
en. If you get
this error message, use the IP address instead of STORAGE.
1. Log in as admin using your web browser.
2. Under SMB Server, make sure the folder you want to access
is in the Sharing List (e.g. PUBLIC without password).
3. Go to IP Config, make sure it is set to Automatic IP and write
down the IP address you see there.
4. Go to your Finder and select Go/Connect to Server
5. Type smb://IP/PUBLIC and click on Connect. For the IP use
the IP address you wrote down in step 3, for PU
the folder name you added to the Sharing List in step 2.
your computer using
e
opies of your data,
one copy on your LAN disk and a second copy either on your
internal drive or another storage media such as a CD, DVD,
Tape or an additional external drive. Any loss or corruption of
data while using the LAN disk is the sole responsibility of the
user, and under no circumstances will the manufacturer be
held liable for compensation or the recovery of this data.
questions, plea
contact your vend
or check out their
online support area!
Q: I get Error Code -36
A:
The Finder cannot complete the operation because som
data in "smb://storage" could not be read or writt
BLIC use
6. If the LAN disk is connected directly to
the Ethernet cable, the default IP address is 169.254.0.1.
About Data Backup
6.2
To protect your files and help prevent the loss of your data, w
strongly recommend that you keep two c
Page 35 / Chapter6 - Appendix
