Hydra LAN User Guide
2 System Setup
2.1 HDD Installation
Your unit may come with pre-installed hard drives. Before opening such an enclosure, read
the warranty and any other notes from your vendor carefully, as this could void your
warranty.
1. Unlock the switch at the bottom of the case and push the inner chassis from the back
until the front panel is out of the housing.
2. Pull the front panel out and then lift it up to remove it.
3. Turn the screws on the HDD rack counter-clockwise to loosen it and then pull out the
cassettes for the hard drives.
Page 5 / Chapter 2 - System Setup
