Page
38
of
63
Hub
This section will instruct the correct procedure on how to remove and replace the Hub.
Removal
Step 1 - Remove external covers off the Hoist. (refer to section 9.1)
Step 2
–
Remove the PCB from the Hoist. (refer to section 9.2)
Step 3
–
Remove the Battery from the battery brackets. (refer to section (9.3)
Step 4
–
Remove Lift Motor. (Refer to section 9.5)
Step 5 - Remove Bottom Cover. (Refer to section 9.7)
Step 6 - Remove Lift Tape. (Refer to section 9.10)
Step 7
–
Remove Air Tube Grommet (refer to section 9.15)
Step 8
–
Using an 8mm spanner, loosen the M5 x 12 screw (arrowed)
–
The screw is not
required to be removed. (This is the Battery Bracket beside the Air Grommet)
Step 9
–
Using an 8mm spanner or a Pozi screw driver remove the M5 x 8 screw (arrowed)
from the chassis.
Step 10 - Pivot the battery bracket to its maximum height.
Содержание TX440 Advanced PT
Страница 10: ...Page 10 of 63...
Страница 11: ...Page 11 of 63...
