995068 – Revision A
Page 28 of 36
9.10 – Leg – (LH Leg and RH Leg)
Within this section it will explain the correct procedure on removing and reinstalling the Legs of the
Hoist, images refer to one leg only but same applies to both.
Removal
Step 1 - Place the Hoist on its side for easier service – Gently rest the Hoist on its side to
avoid damage such as paint scratching.
Step 2 – Remove the Leg Rod Assembly. (Refer to section 9.6)
Step 3 – Remove the Front Castor. (Refer to section 9.8)
Step 4 – Using two 5mm Allen Keys, remove one of the screws from either side of the
Pivoting Pin.
Step 5 – Push the Pivoting Pin through the Leg to remove.
Step 6 – While pushing the bolt through, remove the TWO washer from the underside of the
leg assembly.
Refitting / Replacement
Step 7 - Refitting is a reversal of the removal process noting the following points:
A)
Once the Bolt is secured, ensure that the leg is able to move freely, without any play
between the Leg and Base.
B)
Apply Loctite 243 to the screws when refitting.
