background image

For more information regarding Invacare products, parts, and services, please visit www.invacare.com

Part No 1163186

1

Rollator

Rollator

Model 65510

SAVE THESE INSTRUCTIONS

DEALER:

 

These

 

instructions

 

MUST

 

be

 

given

 

to

 

the

 

user

 

of

 

this

 

product.

NOTE:

 

Check

 

ALL

 

parts

 

for

 

shipping

 

damage.

 

If

 

shipping

 

damage

 

is

 

noted,

 

DO

 

NOT

 

use.

 

Contact

 

carrier/dealer

 

for

 

further

 

instruction.

 

WARNING

• DO NOT use this product or any available optional equipment without first completely reading and understanding these 

instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied 

with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a 

healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage 

may occur.

• Each individual should ALWAYS consult with their physician or therapist to determine proper adjustment and usage.

• DO NOT use the rollator as a wheelchair or transport device. 

• A physical/occupational therapist should assist in the height adjustment for maximum support and correct brake activation.

• Care should be taken to ensure that all hand and height adjustments are secure, and that casters and moving objects are in good 

working order before using this or any mobility aid.

• All casters MUST be in contact with the floor at all times during use. This will ensure the rollator is properly balanced.

• When using the rollator in a stationary position, the hand brakes MUST be locked.

• ALWAYS observe the weight limit on the labeling of your product. Check that all labels are present and legible. Replace if 

necessary.

• The rollator basket and tray have a weight limitation of 11 lbs (5 kg). The tote bag has a weight limitation of 10 lbs (5 kg). Items 

placed in either the basket or the bag should NOT protrude from the basket or bag.

• If push handles are exposed to extreme temperature (above 100°F or below 32°F), high humidity and/or becomes wet, prior to 

use, ensure hand grips DO NOT twist on rollator handle - otherwise damage or injury may occur.

• After installation and before use, ensure that all attaching hardware is tightened securely.

• DO NOT hang anything from the frame of the rollator. Items should be placed in the basket or the tote bag.

 

ACCESSORIES WARNING

• Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories 

designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Assembling the Rollator

NOTE:

 

For

 

this

 

procedure,

 

refer

 

to

 

FIGURE 1.

1.

Remove

 

plastic

 

caps

 

from

 

the

 

side

 

frame

 

tubes.

 

2.

Unfold

 

the

 

rollator

 

and

 

engage

 

the

 

locking

 

mechanism

 

between

 

the

 

front

 

frame

 

tubes.

 

Refer

 

to

 

Detail

 

“A”.

NOTE:

 

The

 

locking

 

lever

 

and

 

washer

 

are

 

installed

 

on

 

the

 

outside

 

of

 

the

 

frame

 

tubes.

 

3.

From

 

the

 

inside

 

of

 

the

 

frame,

 

put

 

the

 

bolt

 

through

 

the

 

locking

 

lever

 

mounting

 

holes.

 

Refer

 

to

 

Detail

 

“B”.

4.

Put

 

a

 

washer

 

onto

 

the

 

bolt.

5.

Thread

 

the

 

locking

 

lever

 

onto

 

the

 

bolt.

 

DO

 

NOT

 

tighten

 

the

 

locking

 

lever.

6.

Repeat

 

STEPS

 

3

5

 

to

 

install

 

the

 

opposite

 

locking

 

lever.

7.

On

 

both

 

sides

 

of

 

the

 

rollator,

 

insert

 

and

 

adjust

 

the

 

handle

 

to

 

the

 

appropriate

 

height.

 

Tighten

 

the

 

locking

 

lever

 

onto

 

the

 

bolt.

 

WARNING

The handles MUST NOT be angled outside the marked 

position as this reduces the rollators lateral stability. Refer to 

Detail “C”.

Adjusting Handle Height

1.

On

 

both

 

sides

 

of

 

the

 

rollator,

 

loosen,

 

but

 

DO

 

NOT

 

remove,

 

the

 

locking

 

levers.

2.

Adjust

 

each

 

handle

 

to

 

the

 

appropriate

 

height

 

and

 

tighten

 

the

 

locking

 

lever.

 

Make

 

sure

 

both

 

handles

 

are

 

adjusted

 

to

 

the

 

same

 

height.

Removing the Handles

1.

On

 

each

 

side

 

of

 

the

 

rollator,

 

loosen

 

but

 

DO

 

NOT

 

remove

 

the

 

locking

 

lever.

2.

Remove

 

the

 

handles

 

from

 

the

 

frame

 

tubes.

Installing the Bag, Basket and Tray

NOTE:

 

For

 

this

 

procedure,

 

refer

 

to

 

FIGURE 1,

 

Detail

 

“D”.

NOTE:

 

To

 

remove

 

the

 

bag,

 

basket

 

and

 

tray,

 

reverse

 

these

 

procedures.

Bag

Hang

 

the

 

bag

 

between

 

the

 

rollator

 

frame

 

tubes

 

and

 

secure

 

with

 

snap

 

button

 

flaps.

Basket

Install

 

the

 

basket

 

onto

 

the

 

hooks

 

on

 

the

 

rollator

 

frame.

Tray

Put

 

the

 

tray

 

in

 

place

 

on

 

top

 

of

 

the

 

basket.

FIGURE 1   

Assembling the Rollator

Assembly, Installation and Operating Instructions

DETAIL “B”

Basket

Tray

Bag

DETAIL “D”

Locking 

lever

Bolt

Locking Lever 

Mounting Hole

Handle

Push down to engage locking 

mechanism between frame tubes

DETAIL “A”

Incorrect

Correct

DETAIL “C”

Отзывы: