995068 – Revision A
Page 26 of 36
9.8 - Front Castor
Within this section it will explain the correct procedure on removing and reinstalling the
Front Castor for servicing procedures or replacement.
Removal
Step 1 - Place the Hoist on its side for easier service – Gently rest the Hoist on its side to
avoid damage such as paint scratching.
Step 2 – To release the Front Castor, place a 6mm Allen Key into the countersunk bolt and
use a 17mm Socket on the underside of the Castor as shown and loosen.
Step 3 – Remove the nut and washer from the Bolt.
Step 4 – Remove the Castor from the securing bolt as shown.
Refitting / Replacement
Step 5 - Refitting is a reversal of the removal process noting the following points:
A)
Ensure that the Castor is secured tightly, there should be no play after fastening.
B)
Ensure the Castor rotates freely.
