995068 – Revision A
Page 22 of 36
9.6 – Leg Rod Assembly
Within this section it will explain the correct procedure on removing and reinstalling the Leg
Rod Assembly for servicing procedures or replacement.
Removal
Step 1 – Place the Hoist in its side for easier service – Gently rest the Hoist on its side to
avoid damage such as paint scratching.
Step 2 – Using a 6mm Allen Key, remove all four Bolts to release the two Leg Rods.
Refitting / Replacement
Step 3 - Refitting is a reversal of the removal process noting the following point:
A)
Ensure to attach the two Leg Rods correctly, use the image above for reference.
B)
Apply Loctite 243 to all four bolts.