Mackie UP4061 Скачать руководство пользователя страница 11

UP4000 – 11

General

Power Consumption

UP4060:

180 VA

UP4120:

450 VA

UP4160:

550 VA

AC Line Voltage

115 VAC, 60Hz

230 VAC, 50Hz

Fuse Ratings

Model

Line Fuse 230 VAC

Line Fuse 115 VAC

24 VDC Fuse

UP4060

1.25AT

2.5AT

5AT

UP4120

2.5AT

5AT

10AT

UP4160

3.15AT

6.3AT

16AT

Dimensions

Height:

3.5" (88mm)

Width:

17.0" (431mm)

Depth:

12.4" (314mm)

Weight:

UP4061:  22 lbs. (10.0kg)

UP4121:  28 lbs. (12.7kg)

UP4161:  31 lbs. (14.1kg)

6.

Service Information

In the event that your UP4000 Series amplifier

should require servicing, please follow these
instructions:

1. Call Mackie Industrial Tech Support at 1-888-337-

7404, 8 am to 5 pm PST (Monday-Friday), to verify
the problem and obtain a Return Authorization (RA)
Number. Be sure to have the serial number of the
unit when you call. 

You must have a Return

Authorization Number in order to obtain warranty
service at the factory or at an authorized service
center.

2. Pack the unit in its original packaging. 

This is very

important.

 Mackie Industrial is not responsible for

any damage that occurs during shipping due to
non-conventional packaging. Original packaging
helps to minimize the possibility of shipping
damage.

3. Include a legible note stating your name, return

shipping address, (no P.O. boxes), daytime phone
number, Return Authorization Number, and a
detailed description of the problem, including how
we can duplicate it.

4. Write the Return Authorization Number in 

BIG

BOLD PRINT

 on the top of the box.

5. Ship the unit to us. We suggest insurance for all

forms of cartage. Ship to this address:

Mackie Industrial

Service Department

One Main Street

Whitinsville, MA  01588

Disclaimer

Mackie Industrial continually engages in

research related to product improvement, new
materials, and production methods. Design
refinements are introduced into existing products
without notice as a routine expression of that
philosophy. For this reason, any current Mackie
Industrial product may differ in some respect from
its published description, but will always equal or
exceed the original design specifications unless
otherwise stated.

Mackie Industrial is a trademark of Mackie

Designs Inc.

All other brand names mentioned are

trademarks or registered trademarks of their
respective holders, and are hereby acknowledged.

© 2001 All Rights Reserved.
Mackie Industrial.
Printed in the U.S.A.

Содержание UP4061













Отзывы: