Mackie DIGITAL XBUS - SOFTWARE, Руководство по замене установки

Страница: 6 / 25

6.
Next remove the AGP video card. Start by sliding the latch at the rear of the of the AGP slot
backwards away from the video card. Lift the front of the video card up slowly and pull upwards.
Note: Set the AGP video card in a safe place away from any potential electro-static discharge.
7.
Now it is time for the most important part. Take the Digital X bus PCI card is located in PCI
slot 5. Slowly pull the PCI card upwards away from the PCI slot.
Do not remove the PCI
card completely.
You will see the PCI card start move once the card is free from the PCI slot
place it off to side between the hard drive and backplane leave all 3 ribbon cables connected to
the backplane.