Mackie DIGITAL XBUS - SOFTWARE, Руководство по замене установки

Страница: 24 / 25

>PnP/PCI Configuration
Init Display From [Onboard/AGP]
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD)]
X IRQ Resources
………………………………………………………………………………………………
>Hardware Monitor
CPU Warning Temperature [Disabled]
The remaining parameters will be grayed out and are for monitoring your system only.
………………………………………………………………………………………………
>Processor & Clock Option
Limit CPUID MaxVal [Disabled]
Hyper-Threading Technology [Enabled]
Spread Spectrum [Disabled]
CPU Clock [200MHz]
………………………………………………………………………………………………
SECURITY
Set Supervisor Password [Disabled] will not show option
Set User Password [Disabled] will not show option
Password Check [Setup]
………………………………………………………………………………………………
BOOT
>Hard Disk Priority
1. ChO M. : ST340014A
2. Bootable Add-in Cards
First Boot Device [USB-CDROM]
Second Boot Device [Hard Disk]
Third Boot Device [Removable]
Boot Other Device [Enabled]
………………………………………………………………………………………………
EXIT
Save & Exit Setup