There are 64 general purpose outputs available for use.
1. On the menu bar, click Configure -> Control, then select the Output Signals tab.
2. Scroll to the signal you want to map an I/O point to.
3. Enable the signal by checking the box for Mapping Enabled.
4. Select the Device that owns the I/O point from the drop down.
5. Select the Output Name from the drop down.
6. Check the Active Low box if the output is wired active low. This means the signal will be active when the I/O
point is low.
7. Give the signal a User Description that describes what the signal represents. This description will be used
throughout the control. If no description is given, the signal name will be used.
8. Press Apply to save any changes and OK to close the configuration window.
Assigning I/O to Output Signals
