background image

11

Test strip reader QUANTOFIX

®

 Relax 1.0, 02.2022 

Electromagnetic Compatibility

Target environment of device use: Application in the commercial laboratory environment.
•  This device has been developed and tested in accordance with CISPR 11 Class A. It 

can cause radio interference in a domestic environment. In this case, you may need to 
take action to correct the interference.

•  Use of this equipment in a dry environment, especially if synthetic materials (synthetic 

fiber clothing, carpets, etc.) are present, can cause destructive static discharges that 
can cause erroneous results.

•  Do not use this device near sources of strong electromagnetic radiation, as they may 

interfere with proper operation.

•  This idevice is in accordance with the applicable parts of the requirements for emission 

and immunity described in the IEC 61326 series of standards.

•  Before use, the electromagnetic environment must be assessed.
EMC Class A according CISPR 11:
The device can be used in all institutions excluding residential areas and areas which are 
directly connected to the public power supply, if the puplic power supply supplies buildings 
for residential purpose.

Disposal

NOTICE

 Disposal via public disposal systems is not permitted. Contact your local 
MACHEREY‑NAGEL representative.

Disposal according to EU Directive 2012/19/EU. In accordance with the EU Directive 
2012/19/EU MACHEREY‑NAGEL takes back the old device and disposes it free of 
charge.

Manufacturer

 MACHEREY‑NAGEL GmbH & Co. KG

If you still have questions or need technical assistance after reading the manual, contact:
MACHEREY NAGEL GmbH & Co. KG 
Valencienner Str. 11 · 52355 Dueren · Germany 
Phone: +49 2421 969 0 
e‑mail: info@mn net.com 

www.mn-net.com

Test strip reader QUANTOFIX

®

 Relax

Содержание QUANTOFIX Relax













Отзывы: