Mace Bumpa Petrol 6m, Руководство оператора

Страница: 30 / 39

30 | P a g e
9. Remove engine pin and position
engine to rest into frame on pivot
collar. Insert pin and lock anti-luce
fastener. (Fig. 7.)
10. Lift anti-luce fastener and rotate
belt cover clear to expose pulley.
Place vee belts onto machine pulley,
then lift engine to position belts onto
engine pulley. Lower engine. (Fig. 8.)
11. Rotate engine belt tensioner into
place so that plunger is over recess
in engine cradle. Operate lever to
tension belts. (Fig. 10.) Rotate belt
cover back into position and lock
anti-luce fastener. Plug stop lead into
machine.
Never operate machine
with cover open or engine stop
lead unplugged.
12.
To reverse machine fit engine as
per step 8. Release black vee belts
and place on hangar (top of red
bonnet). Unhook green belt and
place on n/s machine pulley. Cross
belt in figure of 8, lift engine and
position on n/s engine pulley. (Fig. 9)
Lower engine to hang on belt. Close
pulley cover.
Do not use belt
tensioner when using machine in
reverse.