MacDon MD 259140, Руководство по установке

Страница: 4 / 34

List of Revisions
At MacDon, we
’
re continuously making improvements, and occasionally these improvements affect product
documentation. The following list provides an account of major changes from the previous version of this document.
Summary of Change Location
Removed reference to R113 Rotary Disc Pull-Type. Kit
MD #259140 only applies to R116 Rotary Disc Pull-Type
(model years 2015
–
2017).
Throughout.
Corrected captions. Throughout.
Revised description of NOTE. 1.1 Signal Words, page 1
Added a WARNING to the procedures for opening
cutterbar doors.
•
3.1 Opening Cutterbar Doors
–
North America, page 9
•
3.2 Opening Cutterbar Doors
–
Export Latches, page 10
Added a step to the procedures for opening cutterbar
doors.
•
Step 2, page 9
•
Step 2, page 10
Added a DANGER and CAUTION to the procedure for
removing discblades. 3.3 Removing Discblades and Attachment Hardware, page
12
Added two steps to the procedure for removing discblades.
•
Step 1, page 12
•
Step 2, page 12
Added an IMPORTANT to the procedures for removing and
installing discblades.
•
Step 5, page 12
•
Step 3, page 22
Regarding the four bolts that secure the driveline assembly
to the hub drive:
•
Corrected the type of threadlocker required. The bolts
require Loctite
®
243 or equivalent, NOT Loctite
®
242 or
equivalent.
•
Changed the torque value from 95 Nm (70 lbf·ft) to
102 Nm (75 lbf·ft).
•
Step 9, page 19
•
Step 10, page 19
Regarding the eight bolts used to secure the drum shields:
•
Changed the torque value from 29 Nm (21 lbf·ft) to
27 Nm (20 lbf·ft)
Step 12, page 19
Added a CAUTION to the procedure after the kit
installation. 4 After Installation, page 25
214913
ii
Revision B