MacDon MD 259140, Руководство по установке

Страница: 19 / 34

214913
13
Revision B
3.4 Removing Right Inboard Drum and Disc
To remove the inboard drum on the right side of the cutterbar, follow these steps:
WARNING
Wear heavy gloves when working around or handling knives. Blades are sharp and can cause serious injury.
NOTE:
Arrows in the following illustrations point to the front of the machine.
1027251
A
B
Figure 3.7: Cover of Inboard Right Drum
–
View
from Above
1. Place a wooden block between two cutterbar discs to
prevent disc rotation while loosening blade bolts.
2. Remove eight M8 bolts (A) and washers securing the
cover (B) to the non-driven drum, and remove cover.
1021920
A
B
C
Figure 3.8: Inboard Right Drum with Cover Removed
–
View from Above
3. Remove four M12 bolts (A) inside the drum using a 305 mm
(12 in.) extension and 18 mm socket.
4. Remove wooden block.
5. Remove drum (B) and disc (C) assembly.
6. Discard all parts removed.
INSTALLATION INSTRUCTIONS