MacDon MD 259140, Руководство по установке

Страница: 28 / 34

214913
22
Revision B
3.8 Installing Discblades on New Discs
Install the discblades retained from 3.3 Removing Discblades and Attachment Hardware, page 12 on the new discs. Follow
these steps:
WARNING
Wear heavy gloves when working around or handling knives. Blades are sharp and can cause serious injury.
1004029
D
B
A
C
Figure 3.28: Discblade
1. Place a pin (or equivalent) in the front hole of the rock
guard to prevent disc rotation while tightening blade bolts.
2. Install blade (A) with shoulder bolt (B) onto disc (C). Blade
and bolt are retained from
3.3 Removing Discblades and
Attachment Hardware, page 12 .
3. Install nut (D) and torque to 125 Nm (92 lbf·ft).
IMPORTANT:
Nuts are one-time use only. When flipping or changing a
blade, replace using a
NEW nut only.
WARNING
Ensure cutterbar is completely clear of foreign objects. Foreign objects can be ejected with considerable force when the
machine is started, and may result in serious injury or machine damage.
INSTALLATION INSTRUCTIONS