3.2
Installing Traction Drive Test Fittings
The test fittings are installed to aid in any future neutral adjustments that may be required.
1.
Locate the four plugs (A) that will be replaced with
fittings on the traction drive pump assembly (B).
Figure 3.8: Location of Three Plugs
Figure 3.9: Location of One Plug
2.
Using a 3/4 in. wrench, remove one ORB plug (A) from
the traction drive pump assembly.
NOTE:
It may be difficulty to engage a torque wrench
onto the flats of the fitting; if so, lanyard holder
may be bent up slightly in order to provide
additional clearance for a wrench.
Figure 3.10: Traction Drive Pump Assembly
167730
12
Revision B
Содержание M155
