![background image](http://html.mh-extra.com/html/macdon/a40-d/a40-d_assembly-instructions-manual_685653019.webp)
7.
Attach chain to center-link anchor (A) on frame tube
and raise rear of header approximately 305 mm (12 in.)
off ground.
Figure 3.12: Center-Link Anchor
8.
Remove lynch pin from clevis pin (A) in header stand
at right side of header.
9.
Hold stand (B) and remove clevis pin (A).
Figure 3.13: Header Stand in Shipping Position
10. Invert stand (A) and reinstall on header leg in upper
hole location with clevis pin (B). Secure clevis pin (B)
with lynch pin.
NOTE:
In soft conditions, use a wooden block under
the stand.
11. Lower header onto stand (A).
Figure 3.14: Header Stand
147913
13
Revision A
Содержание A40-D
Страница 2: ...A40 D Self Propelled Windrower Auger Header Published May 2016 ...
Страница 76: ......
Страница 100: ......
Страница 119: ......