![background image](http://html.mh-extra.com/html/macdon/a40-d/a40-d_assembly-instructions-manual_685653042.webp)
If only three drive hoses are present, before following the
procedure below, configure the M200 to run an A40-D
Auger Header by installing kit MD #B4651.
The kit
includes an additional hose (A), hardware, and installation
instructions.
Figure 3.64: Kit MD #B4651
1.
Disengage rubber latch (A), and open driveline
shield (B).
Figure 3.65: Driveline Shield
2.
Remove cap (A) from electrical connector, and remove
connector from support bracket.
3.
Disengage and rotate lever (B) counterclockwise to
fully up position to release the hose bundle (C).
Figure 3.66: Support Bracket and Hose Bundle
147913
36
Revision A
Содержание A40-D
Страница 2: ...A40 D Self Propelled Windrower Auger Header Published May 2016 ...
Страница 76: ......
Страница 100: ......
Страница 119: ......