![background image](http://html.mh-extra.com/html/macdon/a40-d/a40-d_assembly-instructions-manual_685653088.webp)
8.
Place wooden blocks (A) under header cutterbar
and legs.
Figure 5.9: Header on Blocks
9.
Lower header onto blocks so that members (A) lift off
of links (B).
10. Shut down engine and remove key.
Figure 5.10: Member and Link
11. Remove nut, washer, and bolt (A) that attach shims (B)
to link at the header high end.
12. Remove one or both shims (B) and reinstall the
hardware (A).
13. Start engine and raise header slightly. Check level
of header.
14. If additional levelling is required, install the removed
shim on the opposite linkage.
NOTE:
If required, additional shims (MD #110854) can
be ordered from your MacDon Dealer.
NOTE:
Float does
NOT
require adjustment after levelling
header.
Figure 5.11: Shims
147913
82
Revision A
Содержание A40-D
Страница 2: ...A40 D Self Propelled Windrower Auger Header Published May 2016 ...
Страница 76: ......
Страница 100: ......
Страница 119: ......