Adjusting your velocity
The velocity of your marker is adjusted via an adjustment screw on the bottom your inline regulator. To
increase velocity, use a 1/8” Allen Key to turn the adjustment screw counter clockwise. Always adjust your
velocity gently and use a chronograph.
DO NOT ADJUST YOUR VELOCITY ABOVE 300FPS, AND ALWAYS OBEY LOCAL LAWS AND REQUIREMENTS.
Adjusting the trigger
Your trigger has three adjustment screws, they are located in the front face of the trigger in the following
order from top to bottom:
-
Pull tension
-
Switch actuation point
-
Pull length
You can easily adjust these three screws to personalize the feel of your trigger.
