MACDEV DRONE DX Скачать руководство пользователя страница 2

MacDev 2 Year Warranty 

Your marker is covered by the MacDev 2 year warranty against manufacturing defects. Your marker is 
guaranteed free of manufacturing defects for a period of two (2) consecutive years beginning from the 
product release date. If a manufacturing defect is detected, the defective part will be either repaired or 
replaced at no cost to the owner. Your warranty does not cover damage due to theft, misadventure or 
operator error/abuse. 

Caution! 

This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically for paintball 
must be worn by user and persons within range. Recommend 18 years or older to purchase. Persons under 
18 must have adult supervision.

 

READ OWNER’S MANUAL BEFORE USING

 

 

 

Your new Drone DX is machined from high quality solid aluminum and contains precision machined parts for 
high performance. 
Please take the time to learn the parts of your Drone; it will help you when reading this manual. 
 

Numbered basic parts as shown in the figure on the left: 

1. MatchStik 2-piece barrel 
2. Feed clamp lever (used to affix your loader) 
3. Drivetrain, unscrew to remove (note: marker must be degassed first) 
4. Eye covers and screws 
5. Gladiator VX Inline (High Pressure Regulator) 

Содержание DRONE DX















Отзывы: