maintain your marker more often, it is up to you.
When maintaining your marker, use only MacDev accessories. Your marker is packaged with an Allen Key set
and a small tub of MacDev Militia® lube,
only
use MacDev Militia® lube to lubricate your marker.
Basic cleaning
After using your marker, always clean old paint from the outside. Always clean your barrel using a barrel
swab to remove traces of dirt and paint. Use your barrel swab to clean the breech and feed tube in a similar
way.
Your marker’s internal parts are quite well protected and sealed. However, when not in use, dirt can get into
the marker and cause problems – so storage of your marker is just as important as cleaning. When storing
your marker, ensure that it is stored in its bag that is free of dirt, otherwise dirt may get into the venting ASA
or breech.
Parts:
Maintaining the drivetrain
Your drivetrain should be maintained after every 10,000 shots or so. You may maintain your drivetrain more
frequently if you wish.
Before working on your drivetrain, ensure that your marker is degassed. After degassing your marker,
always safely fire a shot – this will ensure that a shot is not stored in your marker. Unscrew the back cap,
and pull the drivetrain out of your marker. Set aside your marker so that you can focus on the drivetrain.
