16
17
MPWP100D-
3
By MacAllister
MPWP100D-
3
By MacAllister
Getting
Started . . .
Getting
Started . . .
Before you start
2. Screw the water inlet hose connector
(7)
to the water inlet
(5)
(Fig.
3
).
Fig.
3
3. Attach a suitable water hose to the water supply and then attach the other end to
the water hose inlet connector
(7)
of the product (Fig.
4
).
Fig.
4
Ø12.7mm
7
NOTE:
(7)
that protects the product against
Pressure hose and spray gun
1. Push the latch (
16c
) on the spray gun
(16)
to open the
connecting port and insert the connector of the high
pressure hose
(15)
(Fig.
5
)
2. Release the latch (
16c
) to lock the hose
(15)
in place.
Check the connection by pulling on the hose. It should
not pull out.
Fig.
5
16c
15
Before you start
High pressure hose
1. Connect the high pressure hose
(15)
to the water outlet
(4)
(Fig.
6
).
2. Check the connection by pulling on the hose. It should
not pull out.
Fig.
6
15
4
Accessories
A choice of lances and accessories are supplied with this product. Please check the
with this product.
Attaching
1. Select the suitable accessory, align the tongues with the grooves of the connecting
port (
16a
) and insert it.
NOTE:
There is a spring in the connecting port of the spray gun
(16)
. This has
to be pressed down and may require some pressure.
2.
7
).
Fig.
7
1.
16
2.
3.
13
Fig.
7
, attachment method shown with extension lance
(13)
GP59-3663602939658-GB-V07.indd 16-17
9/11/16 12:29 pm
