2
2
2
3
MPWP100D-
3
By MacAllister
MPWP100D-
3
By MacAllister
Getting
Started . . .
Getting
Started . . .
Detergent sprayer
Use the detergent sprayer
(17)
to apply detergent. Some cleaning tasks can be completed
with water alone, but for most tasks the removal of dirt becomes more effective if a
detergent is used.
1. Remove the detergent sprayer
(17)
from tank (
17a
) by turning it counterclockwise.
2. Add detergent to the tank (
17a
).
3.
4.
16a
) of spray gun
(16)
Assemble the tank (
17a
) with detergent sprayer
(17)
.
by turning it clockwise to lock it in place (Fig.
1
4
).
Fig.
1
4
→
→
→
→
16a
17a
17
NOTE:
Only use mild, environmentally friendly detergents. Never use aggressive
chemicals, abrasive detergents or similar to avoid damage to your health, the
product and the environment.
WARNING!
Avoid skin contact with detergents, in particular contact with eyes!
immediate medical attention!
Connection to the water supply
WARNING!
Although this product is suitable for attachment to the drinking
water supply local regulations may prohibit the connection to drinking water
connections!
Observe the regulations of your local utility company when connecting the
product to a water supply line! If it is prohibited to connect to the drinking water
12729
type BA. Make sure that the hose is at least a diameter of
12.7
mm (
1/2
”) and
is reinforced!
Before you start
Before you start
If your water supply is potable water, ensure that the pressure washer is
connected to a non-return valve system (type BA).
A Type BA system prevents the contamination of drinking water and must be
connected to the water tap output.
The check valve is sold separately in stores.
Attach a suitable water hose to the water supply and then attach the other end to the
water hose inlet connector
(7)
of the product (Fig.
1
5
).
Fig.
1
5
Ø12.7mm
7
Connection to the power supply
1. Make sure the on/off switch
(3)
is in its off position.
2. Connect the plug
(1)
with a suitable socket.
WARNING!
Check the voltage! The voltage must comply with the information
on the rating label!
If using an extension cord it must be suitable for outdoor use with sockets
protected against water splashing. Ensure the extension cord is of the proper
size and type for your product (
≥
1.5
mm²)! Always use a residual current device
(RCD) protected supply.
Your product is now ready to be used.
GP59-3663602939658-GB-V07.indd 20-21
9/11/16 12:29 pm
