Mac allister MLM1841 Скачать руководство пользователя страница 4

Страница: 4 / 40

Getting

started...

MLM1841

by MacAllister

3. Never mow while people, especially children, or pets are

nearby.

4. Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

Preparation

1. Before use check the supply and extension cord

for signs of damage or aging. If the cord becomes

damaged during use, disconnect the cord from the

supply immediately. Don’t use the product if the cord is

damaged or worn.

2. While mowing, always wear substantial footwear and

long trousers. Do not operate the product when barefoot

or wearing open sandals. Avoid wearing clothing that is

loose fitting or that has hanging cords or ties.

3. Thoroughly inspect the area where the product is to be

used and remove all objects which can be thrown by the

product.

4. Before using, always visually inspect to see that the

cutting blade, cutting blade bolts and cutting blade

assembly are not worn or damaged. Replace worn or

damaged cutting blades and bolts in sets to preserve

balance. Replace damaged or unreadable labels.

CAUTION!

Do not touch a rotating cutting blade.

CAUTION!

Do not touch the cord before disconnecting

the supply.

Operation

1. Operate the product only in daylight or in good artificial

light.

2. Avoid operating the product in wet grass, where

feasible.

Safety warnings

Safety information

Содержание MLM1841









































Результаты поиска

Содержание MLM1841

Отзывы:

Похожие инструкции для MLM1841

Бренды по названию

Популярные бренды

Mac allister MLM1841, Руководство пользователя

Результаты поиска

Содержание MLM1841

Отзывы:

Похожие инструкции для MLM1841

Бренды по названию

Популярные бренды