Mac allister MLM1841, Руководство пользователя

Страница: 7 / 40

EN
07
Getting
started...
MLM1841 by MacAllister
9. Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
10. Wear strong work gloves when removing and
reassembling the cutting blade.
11. Have the product repaired only by an authorised service
centre or similar qualified specialist.
12. When not in use, store the product out of the reach of
children.
13. The product should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
14. If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer
or its service agent.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and low-
noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct cutting attachments for the product and
ensure they are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration
tool use across a longer period of time.
Safety information