Mac allister MLM1841, Руководство пользователя

Страница: 26 / 40

EN
26
In
more
detail...
MLM1841 by MacAllister
Grass collection
1. Remove the mulching insert (20) and attach the grass catcher (7).
2. Empty the grass catcher (7) regularly.
Mulching
WARNING! If the product strikes a foreign object stop immediately! Let
the product cool down and thoroughly inspect the product for damage!
Have any damage repaired before restarting!
Extensive vibration of the product during operation is an indication of
damage! The product should be promptly inspected and repaired!
Operation
NOTE: Mulching means cutting and returning the grass clippings to
the lawn in one step: the grass clippings are cut very fine and then
distributed evenly back onto the lawn. Under normal conditions, the
mulched grass will biodegrade quickly to provide nutrients to the lawn.
Function Grass catcher Mulching insert
Grass collection attached removed
Mulching removed inserted
Mowing
7. Pay special attention when changing direction.
8. Empty the grass catcher (7) regularly.
9. Prepare the product according to required application.
1. Insert the mulching insert (20) into the rear discharge chute (19), make sure
the grass catcher (7) is not fitted to the product.
2. Avoid mowing when the grass is wet from rain or dew. Wet grass may form
clumps which interfere with the mulching action and reduce runtime. The
best time to mow grass is late afternoon when the grass is dry and the newly
cut area will not be exposed to direct sunlight.
3. Set the cutting height to about one third of the grass blade length, ideally
no more than 35 mm at one time for best mulching performance. If the lawn
is overgrown, it may be necessary to increase the cutting height to reduce
the pushing effort and prevent the motor overloading. For extremely heavy
mulching, it is advisable to first cut at a high cutting height, and then again to
a lower cutting height. Otherwise, make narrower cuts and mow slowly.
4. Keep the housing free of built-up grass for best performance. From time
to time switch the product off and wait for the blade to come to a complete
stop. Then turn the product on its side. Using an object such as a wooden