Mac allister 64 77 19, Оригинальное руководство пользователя

Страница: 30 / 116

30
Operation
Observe the safety instructions!
Important note: The machine must only be commissioned when the protection
and safety equipment is completely mounted.
Setting the saw bench, Fig. 4,5
Setting the angle scale
•
Release the star button (G) and bring the saw bench (D) to a right angle in
relation to the saw blade.
• Use a 90° angle (E) to measure the right angle between the blade and the
bench. The saw blade should be 90° to the angle.
• Close the star button (G) again when the distance between the blade and the
90° angle is at a minimum. The bench should then be at 90° to the saw blade.
• Release the lock screw (F) and bring the indicator to the zero position. Fas­
GB
MSSP120
In
more
detail...
Intended use
• Risk of injury of fingers and hands due to the saw blade when guiding the
workpiece inappropriately.
• Injuries if the workpiece is thrown away when holding and guiding it in­
appropriately, e.g. working without stop.
• Health risk due to noise. The admissible noise level is exceeded during
working with this machine. Always wear personal protective equipments
such as hearing protection.
• Injuries due to faulty saw blade. Check the saw blade regularly and before
each use for damage.
• Danger due to electricity, use of improper electric connection cables.
• When using special equipment, the operating instructions of this equip­
ment must be read thoroughly and complied with.
• Furthermore, less obvious remaining risks can exist despite all protective
measures.
• Remaining risks can be minimised, if the safety instructions and Intended
use as well as the entire operating instructions are observed.
WARNING!
Switch the machine off and disconnect the pow­
er supply unit before making any adjustments or
carrying out maintenance works, or replacing the
saw blade.
Wear gloves when handling the saw blade.