Filling the Water Cylinder
1.
2.
Using the Water Dispenser::
1.
2.
3.
the door.
IMPORTANT
IMPORTANT
84
Always hold the glass while serving water.
Don’t remove dispenser parts.
To pour the water in, lift the lid, add only natural drinking water using a glass
or jug until the liquid reaches the level marked on the cylinder.
Push the dispensing flap backwards with a glass until water comes out.
Release the flap. Keep the glass in place until the water flow stops
completely.
In the case of an accidental water spillage; slide the droplet-collecting grille
forwards, throw out the water, and replace the grille by sliding it back in.
Replace the top, putting pressure on it.
Always hold on to the glass while serving water.
The capacity of the water tank depends on the model of your
refrigerator.
15 ft (400 Lts) = 2 liters of water
19 ft (510 Lts) = 3 liters of water
* To verity the water tank capacity look on the labels inside
your refrigerator.
Precautions for Use:
To avoid water overflowing, do not fill the container to the top. The
maximum water level is marked on the cylinder.
If the water container has not been properly positioned, water could
escape and won’t be released through the dispenser.
If the dispenser is not used regularly, water may have an odd taste when
it’s subsequently used.
Don’t remove any parts of the dispenser except for the cylinder, its top,
and the grille which collects droplets.
After serving water, it is normal for a few droplets to fall. You can
minimise this by removing the glass slowly from the dispenser. At other
times, due to the formation of light condensation, droplets may fall.
