1
HERE ARE THE FEATURES OF YOUR NEW REFRIGERATOR
FEATURE CHART
2
2
3
6
5
4
7
9
10
11
12
13
1
14
15
19
20
17
18
8
16
!
FREEZER TEMPERATURE
CONTROL KNOB
@
ICE TRAY
#
F SHELF
$
ICE HOLDER ASSEMBY
%
ICE CASE FRAME
ASSEMBY
^
ICE BOX
&
CHILLED CORNER
*
LAMP COVER
(
REFRIGERATOR
TEMPERATURE CONTROL
)
R SHELF
1
CRISPER COVER
2
CRISPER
3
ADJUSTABLE POOT
4
F POCKET (SM)
5
F POCKET (SM)
6
EGG CASE
7
EGG POCKET
8
R POCKET (SM)
9
R POCKET (MEDIUM)
0
R POCKET (BG)
Take a moment to know all the features and convenience. Numbers
match those in the illustration on page 1.
■
Ice Tray: Fill tray 3/4 full to allow expansion of water during freezing. Place
tray in freezer chest. To release cubes, twist lid slightly.
■
Removable Shelf: Both shelves can be removed by pulling forward.
■
Crisper: Use for fruit and vegetable storage. Both the crisper and its cover shelf
are removable for easy cleaning. Simply slide forward to remove.
■
Egg Pocket: Egg supporter in this pocket can be turned upside down.
Use for small size goods.
■
No Frost: No frost in freezing-room.
CAUTION
1. Be sure to check with your voltage, before inserting the power supply cord into the socket.
2. Contact the earthing conductor to this unit with an attachment earthing screws.
3. Don’t spill to this unit.
4. Don’t work with flammable spray, such as painting, near this unit.
5. Don’t put ignitable materials, such as benzine, L .P . Gas, alcohol, etc., into this unit.
6. Be careful of the leakage of any gas equipment near this unit.
7. Be sure not to hold to the door of this unit by children.
8. Be sure not to reinsert the power supply, cord with 5 minutes after
releasing it from socket. If not, a trouble may be occurred to compressor.
RETURN-SPRING
STARTING POINT OF TWISTING
ICE CASE FRAME
120°
ICE CASE
■
Ice Case Frame Assembly
1) Fill the ice case with water upto the water level line and insert it into the
designated space in the ice holder.
2) After the water is completely frozen, twist the ice case handle clockwise and let the ice
fall into the ice box below. When all ice has been cleared from the ice case, let go of the
handle which will return to its original position by a return spring installed.
