mabe MKR62GWTWB, Руководство по обслуживанию

Страница: 16 / 29

Service Engineering
- 16 -
REVERSING THE DOOR - GLASS PANEL DOOR MODELS
1. Open the door approximately 130 degrees. With a putty knife,
remove the 4 plastic caps located along the left side of the front
panel and set them aside.
2. Remove the bottom screw from each hinge (right side) and
partially insert them into each top hinge hole on the left side
NOTE : All 4 front panel hinge screws will now be in the top hinge holes -
2 on the left and 2 on the right.
3. Loosen each top hinge screw on right side. Remove
the door and place it on a protective flat surface to
avoid any damage.
4. Remove both the blind plate and the strike plate and
install them in the opposite positions.
5. Remove the 4 door hinge screws, 6 inside screws
and 2 pocket screws. Lift the inner door upwards
using a flat blade screwdriver.
6. Remove and swap the 2 plastic caps and the 2 hinges.