mabe MEV07VV Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 28

mabe MEV07VV Скачать руководство пользователя страница 8

8

operating temperature

Note:

Performance may be reduced outside of these operating tem-

peratures.

Cooling operation

Outdoor
temperature

Indoor
temperature

18-43°C/64-109°F (18-52°C/64-
125°F for special tropical models.

17-32°C/62-90°F

power point requirement

• Power cord conductors are distinguished according to color as fol-

lows (see Fig. a).

• For your safety and protection, this unit is earthed through the

power cord (see Fig. b).

• Please contact the manufacturer or its service agent or a similar

qualified person if you want to replace it.

• Be sure that the unit has being correctly grounded. The wall outlet

(air-break switch) should be provided with reliable earth wire.

• The unit should be provided with an individual circuit and the cir-

cuit breaker/fuse rating should be the same as that of the power
cord and wall outlet.

Power cord

L

E

N

E- Earth wire, Yellow/Green

N-Neutral wire, Blue

L-Live wire, Brown

Fig. A

Wall outlet

Air-break switch

Fig. B

NOTE:

To be in compliance EN61000-3-11, the product MWT2F-

21CM-QB4 shall be connected only to a supply of the system imped-
ance: |Zsys|=0.156 ohms or less; the product MWT2F1-22CM-QB4
shall be connected only to a supply of the system impedance:
|Zsys|=0.132 ohms or less; the product MWT2F1-22CM-QB8 shall be
connected only to a supply of the system impedance: |Zsys|=0.077
ohms or less. Before connecting the product to public power net-
work, please consult your local power supply authority to ensure the
power network meet above requirement.

«
...
6
7
8
9
10
...
»

Содержание MEV07VV





























Отзывы:

Нет отзывов