
7
• To reduce the risk of fire or electric shock, do not use this fan
with any solid-state speed control device.
• Do not run the power cord under carpeting. Do not cover cord
with rugs, runners, or similar coverings. Do not route cord un-
der furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
• If connecting power to fixed wiring, an all-pole disconnection
device which has at least 3 mm clearances in all poles, and have
a leakage current that may exceed 10 mA, the residual current
device (RCD) having a rated residual operating current not ex-
ceeding 30 mA, and disconnection must be incorporated in the
fixed wiring in accordance with the wiring codes.
• To know how to fix the appliance to its support, read the in-
stallation instructions section in this manual.
• All wiring must be performed strictly in accordance with the
wiring diagram located inside of the unit.
safety PRECAUTIONS (prior to operation)
Preparing for operation
• Contact an installation specialist for installation.
• Plug in the power plug properly.
• Do not use a damaged or nonstandard power cord.
• Do not share the same outlet with other appliances.
• Do not use an extension cord.
• Do not start or stop operation by plugging and unplugging the
power cord.
operation PRECAUTIONS
• Exposure to direct airflow for an extended period of time could be
hazardous to your health. Do not expose occupants, pets, or plants
to direct airflow for extended periods of time.
• Due to the possibility of oxygen deficiency, ventilate the room
when used together with stoves or other heating devices.
• Do not use this air conditioner for non-specified special purposes
(e.g. Preserving precision devices, food, pets, plants, and art ob-
jects). Usage in such a manner could harm such property.
cleaning and maintenance PRECAUTIONS
• Do not touch the metal parts of the unit when removing the filter.
Injuries can occur when handling sharp metal edges.
• Do not use water to clean inside the air conditioner. Exposure to
water can destroy the insulation, leading to possible electric shock.
• When cleaning and maintenance the unit, first make sure that the
power and circuit breaker are turned off.