Scancommander
Scancommander
Scancommander
Scancommander
Scancommander
eMail: [email protected] . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
41
41
41
41
41
INSERT
SINGLE
PROGRAM
1
SEQUENCE:
STEPS: 5
(94770)
1.0
2.0
2.1
2.2
3.0
......
SEQUENCE
FREE:
3.5
STEP :
6
STEP TIME
1.00 sec
STEP FADE
0.00 sec
NO NAME
DELETE
ALL
Compared to programming a chaser step the following functions are
available:
ENCODER 2
Each step has its individual number from 0.0 up to
99.9. Like a name this number will stay with the step
during all copy and move operations.
Encoder wheel: first digits
Encoder ring: digits after the decimal point
STEP MODE buttons at the Sequence Playback
Sets the GO MODE for this step, which marks, how
the step will be recalled when running the sequence.
The selected mode is shown by the LED inside its
respective button and is displayed on top of encoder
1.
MAN FADE
Manual x-fade via the X-FADER in the sequence area.
GO BUTTON
The step has to be recalled by the GO button.
EXT SOUND
The step will wait for a sound impulse.
SET RATE
The step will be recalled automatically, as soon as
the STEP TIME of the last step runs out.
STEP TIME and
ENCODER 3
Sets the time between this step and the start of the
next one, if the next one is on GO MODE "SET
RATE".
Individual and freely
adjustable step numbers
STEP TIME for timed step
following
Programming of
sequence steps
STEP TRIG
0 %
Different GO MODES
LINK FADE
