M7 DD-2050, Руководство пользователя

Страница: 4 / 41

3
conditions will reduce person- al injuries.
3) Avoid suddenly starting. Ensure the switch is
in the off position before plugging in. When your
that have the switch on invites accidents.
4) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
7) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust related hazards.
8) Use clamps or another practical way to
support and secure the workpiece to a stable
platform. Holding the work by hand or against
your body leaves it unstable and may lead to
loss of control.
9) Do not use on a ladder or unstable support.
Stable footing on a solid surface enables
better control of the power tool in unexpected
situations.
10)Keep handles dry, clean, and free from oil and
grease. Slippery hands cannot safely control
the power tool.
11)Always wear safety glasses with side shields.
Everyday glasses may have impact resistant
lenses, but they are not safety glasses.
Following this rule will reduce the risk of eye
injury.
12)Protect your lungs. Wear a face or dust mask
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
13)Protect your hearing. Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
serious person injury.
4. POWER TOOL USE AND CARE
1) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
2) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3) Disconnect the plug from the power source
be- fore making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
4) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
7) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
8) Save these instructions. Refer to them
frequently and use them to instruct others
who may use this tool. If you lend this tool
to someone else, also lend them these
instructions.
5. BATTERY TOOL USE AND CARE
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
designated battery packs. Use of any other
battery packs may create a risk of injury and