WebGate 3G Module
Page 5 of 16
Installation Steps
1.
Attach the fasteners
: Attach the four fasteners to the four support holes on the
backside of the casing using the four screws included with the fasteners.
Figure 2 : Mounting
2.
Mount the casing to the wall
: Insert screws into the fasteners’ adjustment slots.
Warning
:
•
It is recommended to install the module in a corridor to avoid exposing it
to noxious gases. Do not install the module directly in a breeding
chamber.
•
To avoid condensation problems inside modules, it is recommended to
install the module on an indoor wall. If this is not possible, use spacing
blocs to let air circulate between the wall and the modules.
•
The module must be installed right side up; the cable entries must point
downwards.
•
The module must be installed in an easily accessible area, but away from
damaging elements like heat, cold, water and sunlight.
www.monitrol.com