TOPRHWS Hardware Manual
M
2
I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
18 / 19
Chapter 8 Maintenance
8.1 Surface Cleaning
Use soft cloth wet by detergent to wipe dirty surface of case out.
8.2 Regular Inspection
For the best operational condition, the product needs regular inspection.
(1) Environment
a. Does the equipment operate within the allowable range of temperature(-10°C~50°C)?
b. Does the equipment operate within the allowable range of humidity(10%~80%RH)?
c. Is there no corrosive gas around?
(2) Power
a. Is the input voltage range?
(3) Related Items
a. Check the touch pad there is no damage, scratch or pollution.
8.3 Problems with the Product
(1) When a problem occurs during operation, stop using the product and contact the A/S department of M2I
Corporation to report the problem(s) you faced.
(2) Only an authorized worker by M2I Corporation can check and repair the product in relation to the
malfunctions of the product.
(3) In case that the problem is not fixed at the site of installation, the equipment can be brought to M2I
Corporation for repair.
(4) The manufacturer, M2I Corporation, is not liable for any damage or malfunctions of the equipment caused
by a user's arbitrary installation and use not described, specified, and/or recommended in this manual.
