TOPRHWS Hardware Manual
M
2
I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055，Republic of Korea
17 / 19
Chapter 7 Installation and Wiring
7.1 Selecting installation Location
(1) Where the movement of TOPRH0700WD FE (main body) is secured after it is connected (fixed) to the front
panel or DIN-rail of the rear.
(2) Where there is no sunlight exposure.
(3) Where there is no noise and power failure.
7.2 Connection of the Cable Pack to the Main Body
For connection to the main body, use a housing and a terminal fit to the connector of the main body.
For details, refer to the manual for TOPRH0700WD FE (main body).
7.3 Power Wiring
When installing the power plug, use a pin terminal to improve the coupling of power wire and electrical
transmission. Attach the power cable to the power terminal of the equipment as below.
(1) Below are the dimensions of the power cable and the earth cable.
(2) Dimensions of the power terminal and the earth terminal.
Caution: Failure to use a pin terminal in accordance with the following dimensions when installing the power
terminal and the earthing terminal may cause abnormal loss or damage to the cable and trigger spark, which
carries the risk of explosion. Therefore, a user is advised to be familiar with how to use a pin terminal below.
B
L
F
E
D
d
1.8~2.0
22~18
12~14
5
3.3~3.8
2~2.5
Power Cable Specification
18~22AWG
FG Cable Specification
Over 4mm
2
(11AWG)
Conductor Type
Simple or Standard Wire
Bolt tightening force
≥ 0.4N.m
Conductor length
