M1 Drones M1 STEM Drone Series Скачать руководство пользователя

Страница: 4 / 45

Safety Precautions and

Warnings

• Always keep a safe distance in all directions

around your model to avoid collisions or
injury. This model is controlled by a radio
signal subject to interference from many
sources outside your control. Interference
can cause momentary loss of control.

• Always operate your model in open spaces

away from full-size vehicles, trafﬁc and
people.

• Always carefully follow the directions and

warnings for this and any optional support
equipment (chargers, rechargeable battery
packs, etc.).

• Always keep all chemicals, small parts and

anything electrical out of the reach of
children.

• Always avoid water exposure to all

equipment not speciﬁcally designed and
protected for this purpose. Moisture causes
damage to electronics.

• Never place any portion of the model in your

mouth as it could cause serious injury or
even death.

• Never operate your model with low

transmitter batteries.

• Always keep aircraft in sight and under

control.

• Always move the throttle fully down upon

strike or crash.

• Always use fully charged batteries.
• Always keep transmitter powered on

while aircraft is powered.

• Always remove batteries before

disassembly

• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before

touching.

• Always remove batteries after use.
• Never operate aircraft with damaged

wiring.

• Never touch moving parts.

Содержание M1 STEM Drone Series














































Результаты поиска

Содержание M1 STEM Drone Series

Отзывы:

Похожие инструкции для M1 STEM Drone Series

Бренды по названию

Популярные бренды

M1 Drones M1 STEM Drone Series, Руководство пользователя

Результаты поиска

Содержание M1 STEM Drone Series

Отзывы:

Похожие инструкции для M1 STEM Drone Series

Бренды по названию

Популярные бренды