12. Gather the FPV bracket.
13. Gather supplied adhesive foam
pad.
14. Mount the foam pad in the
middle of the bottom side on
the FPV bracket.
15. Remove the adhesive cover
for the Camera mount and
install in the
MIDDLE
of
the FPV Bracket, as shown.
16. Insert the FPV camera into
the FPV mount and gently
snap into place.
17. Install the FPV Bracket into
outer airframe mount.
18. Using either skilled fingers or
small pliers, CAREFULLY
push the bracket into the slot,
one side at a time.
19. If the fitment is too tight,
lightly file/trim the lower
edges of the FPV bracket
and/or file/trim the airframe
mount slot.
34
