16
17
02
Connections
Audio Out
001’s main audio output, featuring
balanced TRS plugs. Please note that if
you connect a single 1/4 inch jack to the
Right output, both voices of the 001
will be routed there; on the other hand,
if using two jacks, one voice will be on
the Right, one on the Left output.
Audio In
Two mono TS audio inputs, to process
your audio source with 001’s analogue
VCF and VCA.
USB (Audio, MIDI)
This is intended to be used with future
expansions (like the digital output/FX
card) and nothing should be connected
to it at the moment.
CV In and Out
4x CV/Gate Inputs and 4x CV/Gate
Outputs, 1⁄4 inch TS connectors, to
receive and send a scalable 1-volt-
per-octave signal from/to modular
synthesizers and other instruments
supporting this standard. CV input and
outputs go from +10v to -10V.
Power
AC power inlet, accepting standard
grounded IEC power cord. It operates
over a range of 90 to 260 volts and 50
to 60 Hz. Connect the cord included
with your 001, then press the power
switch to turn the synth on.
MIDI (In, Out, Thru)
To receive/send/pass through MIDI data
from/to other devices.
Headphones
(On the front) A 1/4” stereo jack socket.
We recommend using headphones with
a minimum impedence of 70 ohms.
Connect
Internet connections. Connect an
Ethernet cable directly to your router
to allow updates to the OS and other
internet features.
