8
9
01
I just want to play
this thing...
Power on
Connect the power lead to your 001 then connect the output of the 001 to your mixer, or if
you prefer connect your headphones.
Also connect the ethernet cable from your router to the 001.
If you connect a single 1/4 inch jack to the Right output, both voices of the 001 will be routed
there. On the other hand, if using two jacks, one voice will be on the Right, one on the Left
output.
Before powering up ensure the volume control is at minimum, analogue electronics during
first power on create a ‘pop’ and this may cause damage to your speakers and the sound
guy’s ear drums.
Then power on.
You will see a progress bar on the screen. When the synth has loaded it will change to show
the main patch page.
Press down a key and slowly turn up the volume to a comfortable level.
