manualshive.com logo in svg

M-tech MT-V82N, Руководство пользователя

Поделиться
Скачать
M-tech MT-V82N Скачать руководство пользователя страница 6

 INTRODUCTION

Thank you for purchasing this M-Tech product. 
The MT-V82N VHF Transceivers are designed 
and built with M-Tech’s superior technology and 
craftsmanship. With proper care, this product should 
provide you with years of trouble-free operation.

This document is the operating guide for the   
MT-V82N VHF Transceiver.

 1.1  Important

READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.

SAVE THIS INSTRUCTION MANUAL - This instruction
manual contains important operating instructions 
for the MT-V82N.

 1.2 Explicit defi nitions

Word

Defi nition

 WARNING! Personal injury, fi re hazard or 

electric shock may occur.

 CAUTION!

Equipment damage may occur.

NOTE

Recommended for optimum use. 
No risk of personal injury, fi re or 
electric shock.

 1.3 Precautions

 WARNING! NEVER hold the transceiver so that 

the antenna is very close to, or touching exposed 
parts of the body, especially the face or eyes, while 
transmitting. The transceiver will perform best if the 
microphone is 5 to 10 cm (2 to 4 inches) away from 
the lips and the transceiver is vertical.

 WARNING! NEVER operate the transceiver with 

a headset or other audio accessories at high 
volume levels.

4

SECTION 1SECTION 1

Содержание MT-V82N









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды