M-tech MT-V82N, Руководство пользователя

Страница: 49 / 72

10.3 Memory scan
Memory scan repeatedly scans all programmed
memory channels, except those set as skip
channels.
① Push
[C•MR]
to select memory mode, if necessary.
• “
MR
” appears.
• See below to select bank scan.
② Push
[A•FUNC]
and
[5•SCAN]
to start the scan.
• To change the scan direction, push
[▲]
or
[▼]
.
• When
[VOL]
is assigned as tuning dial, rotate
[VOL]
to change the scan direction. (p.27, 61)
③ Push
[D•CLR]
to stop the scan.
Bank scan
Select the desired bank in step ① above.
① Push
[A•FUNC]
and
[#•BANK]
to select memory
bank mode.
② Rotate
[VOL]
to select the desired bank, A to J.
③ Push
[
✱
•ENT ]
(or
[D•CLR]
) to select the bank.
10.4 Skip channels
In order to speed up the scan rate, you can select
memory channels you don’t wish to scan as skip
channels.
① Push
[C•MR]
to select memory mode, if necessary.
• “
MR
” appears.
② Select a memory channel to set as a skip
channel.
③ Push
[A•FUNC
] and
[6•SKIP]
to toggle the skip
setting ON and OFF.
• “SKIP” appears when the channel is set as a
skip channel.
SCAN OPERATION
Push
Push
"SKIP" appears
47
SECTION 10SECTION 10