M-tech MT-V82N, Руководство пользователя

Страница: 34 / 72

7.3 Offset frequency (USING SET MODE)
When communicating through a repeater, the
transmit frequency is shifted from the receive
frequency by an amount determined by the offset
frequency.
① Push
[A•FUNC]
, then push
[8•SET]
to enter
SET MODE
.
② Push
[▲]
or
[▼]
several times until “±” and offset
frequency appear.
③ Rotate
[VOL]
to select the desired offset
frequency.
• Selectable steps are the same as the pre-set
tuning steps.
• The unit of the displayed offset frequency is
“MHz.”
④ Push
[
✱
•ENT ]
(or
[D•CLR]
) to set the offset
frequency and exit
SET MODE
.
MT-V82N
Reversed OFF ON
Rx freq. 145.30 MHz 144.70 MHz
Tx freq. 144.70 MHz 145.30 MHz
① Push
[A•FUNC]
, then push
[8•SET]
to enter
SET MODE
.
② Push
[▲]
or
[▼]
several times until “REV” appears.
③ Rotate
[VOL]
to turn the reversed duplex mode
ON or OFF.
④ Push
[
✱
•ENT ]
(or
[D•CLR]
) to exit
SET MODE
.
REPEATER OPERATION
32
SECTION 7SECTION 7