M-tech MT-V82N, Руководство пользователя

Страница: 50 / 72

10.5 Priority watch
Priority watch checks for signals on “priority
channels” while operating on a VFO frequency.
Memory or call channel watch
While operating on a VFO frequency, memory
or call channel watch monitors for signals in the
selected memory or call channel every 5 sec.
① Select the desired memory channel or the call
channel.
② Push
[D•CLR]
to select VFO mode.
③ Push
[A•FUNC]
, then push
[7•PRIO]
to start watching.
• VFO is displayed, then the decimal point “.”, on
the frequency readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority
channel, the watching is suspended according
to the setting of the scan resume condition.
④ Push
[D•CLR]
to stop watching.
Memory scan watch
While operating on a VFO frequency, memory
scan watch monitors for signals in each memory
channel in sequence, every 5 sec.
① Push
[C•MR]
to select memory mode, if necessary.
• “
MR
” appears.
② Push
[A•FUNC]
, then push
[5•SCAN]
to start the
memory scan.
③ Push
[A•FUNC]
, then push
[7•PRIO]
to start the
watching.
• VFO is displayed, then the decimal point “.”, on
the frequency readout blinks.
• When the signal is detected on the priority
channel, the watching is suspended according
to the setting of the scan resume condition.
SCAN OPERATION
50 msec.
Memory channel
5 sec.
VFO frequency
48
SECTION 10SECTION 10