7.3. CB Mode
7.3.1. Volume Level setting
Used switch
IVOLI knob
Used indicator
7.3.2. Squelch Level setting
Used switch
[SQ] knob
Used indicator
7.3.3. Auto Squelch Function
Used switch
I
Switch operotion
Press IASQ] for one second
Used indicator
ASQ
7.3.-4. RF Goin LOCAL/DX Control
Used switch
I
Switch operotfon
Press [LO/DX] switch momentarily
Used indicator
LOCAL. OX
7.3.5. NB [NOISE BLANKER) Control
Used switch
I
Switch operotion
Prms INBI switch momentarily
Used Indicator
NB
7.3.6. HI-CUT Control
Used switch
•
I
Switch operotion
Press IHI-CUT] switch for one second
Used indicator
HIC
7.3.7. BuilHn ANL Function
- Tum the [VOL] knob clockwise to Increase the
volume.
- Tum It counter-clockwise to decrease the volume.
• [VOLi Is used for adjusting the Volume Level of
receiver and transceiver's Power On and Off.
- To filter out weaker signals and background noise.
tum the ISQI knob clockwise to increase the squelch
level.
- To decrease the squelch level so you can hear
weaker radio signals. tum the [SQI knob counter
clockwise.
• This function is used for FM Mode and AM Mode
commonly.
- Use [ASQI switch to switch the ASQ On/Off.
ASQ On -ASQ Off
• This function is used for FM Mode and AM Mode
commonly.
• ASQ is a function to which mute is automatically
controlled.
- ILO/DXI switch is used to adjust sensitivity [RF Gain) by
2steps.
LOCAL+-.... DX
• It is adjusted to RF Gain Down when LOCAL is
selected.
• It is adjusted to RF Gain Up when DX is selected.
• Normally. this setting is used DX setting.
• When the LOCAL/DX function is changed while
Memory Channel Recall Mode. then Memory
Channel Recall Mode is canceled.
- NB [Noise Blanlcerl is a function to suppress an ignition
noise for FM Mode and AM Mode reception.
- INBI switch is used to NB [Noise Blanker) On/Off.
NB ON -NB OFF
• When the NB function is changed while Memory
Channel Recall Mode. then Memory Channel Recall
Mode is canceled.
- HI-Cl.IT is a function to cut out high frequency
interference for receiving.
- (HI-CUT] switch is used to HI-CUT function On/Off.
HI-Cl.IT ON ._ .... HI-CUT OFF
• When the HI-Cl.IT function is changed while Memory
Channel Recall Mode. then Memory Channel Recall
Mode is canceled.
ANL {Automatic Noise Limiter) is a function to suppress a while noise of AM Mode automatically. The ANL function is built-in.
and ANL always works at receiving. ANL is an effective function only in the AM mode reception.
p.8
