11.4. System Requirements
In order to install the FFD in your system, ensure that you have the following items:
•
System mounting hardware (usually a 3.5” drive bay with the appropriate mounting holes or
a 5.25” drive bay with guide rails for a 3.5” drive)
•
For the 80-pin (SCA-2) model: Matching 80-pin SCA-2 connector
•
For the 68-pin model:
o
4-pin power cable
o
68-pin ribbon SCSI cable
•
SCSI host adapter
•
Appropriate device driver for your operating system and SCSI host adapter
11.5. Configuring the FFD 3.5” Ultra320 SCSI
Before mounting the FFD in the system’s drive bay, configure the FFD by setting the header,
located at the side of the unit, to meet your system requirements. Any changes to the header
settings must be made while the FFD is powered off, otherwise the unit may be damaged or the
new settings may not be recognized.
Figure 7: LEDs and Header Settings, Side View
Figure 8: FFD 3.5” Ultra320 SCSI 80-Pin Header Settings
47
Product Specification and User Manual FFD 3.5" Ultra320 SCSI
43-PS-0305-00 Rev. 2.0
